Monitoring the Alteration and Natural Recovery of a Monsoon-Dominated Stream System after a Wild Fire Disturbs its Watershed, Stout Canyon, Utah

The alteration of a stream’s morphology and recovery following a watershed fire is well documented in streams where high flow events occur during spring runoff. However, there are very little data regarding the alteration and natural recovery of streams that have high flow events during the late summer monsoon rains. Stout Canyon, a tributary to the East Fork of the Virgin River, is located approximately 30 miles southeast of Cedar City, Utah, and is a monsoon-dominated stream system whose watershed was burned by the Shingle Fire of 2012. Employees of the Dixie National Forest have monitored Stout Canyon since 2002, using Rosgen Field Methods. The alteration and recovery of Stout Canyon after the fire were documented using the same methods. The comparison of the pre-fire and post-fire data demonstrates how the fire altered the morphology of Stout Canyon. The data were also compared to similarly collected data from three snow-melt-runoff-dominated streams in the Rocky Mountain area whose watersheds have also been disturbed by fires. Bank full indicators began to reappear at Stout Canyon three years after the fire, suggesting that the stream is just beginning to redevelop its floodplain. Some results match the general trends that occur in spring runoff-dominated systems. However, major differences between Stout Canyon and other streams appear in bank geometry. In most streams, the largest changes in bank geometry occur within the first year after the fire with minor alteration occurring in the subsequent years, with bank re-stabilization within about three years. Stout Canyon’s banks, however, saw the most alteration during the second year after the fire and it is continuing to undergo major alteration with no signs of stabilizing three years after the fire. This may be a result of the fact that monsoon-caused high-water-events vary greatly from year to year, whereas snowmelt-runoff-caused high-water-events are generally more consistent. Through the course of the study, monsoonal rains led to erosion rates that were ten times greater than spring runoff. The inconsistent high water events on streams like Stout Canyon make it difficult for the stream banks to stabilize as efficiently and quickly as observed on other streams in the Rocky Mountain Region. The information presented here may be applied to other monsoon-dominated-systems to determine proper preventative and restoration methods

The Simons Observatory: Science goals and forecasts

The Simons Observatory (SO) is a new cosmic microwave background experiment being built on Cerro Toco in Chile, due to begin observations in the early 2020s. We describe the scientific goals of the experiment, motivate the design, and forecast its performance. SO will measure the temperature and polarization anisotropy of the cosmic microwave background in six frequency bands centered at: 27, 39, 93, 145, 225 and 280 GHz. The initial configuration of SO will have three small-aperture 0.5-m telescopes and one large-aperture 6-m telescope, with a total of 60,000 cryogenic bolometers. Our key science goals are to characterize the primordial perturbations, measure the number of relativistic species and the mass of neutrinos, test for deviations from a cosmological constant, improve our understanding of galaxy evolution, and constrain the duration of reionization. The small aperture telescopes will target the largest angular scales observable from Chile, mapping ≈ 10% of the sky to a white noise level of 2 μK-arcmin in combined 93 and 145 GHz bands, to measure the primordial tensor-to-scalar ratio, r, at a target level of σ(r)=0.003. The large aperture telescope will map ≈ 40% of the sky at arcminute angular resolution to an expected white noise level of 6 μK-arcmin in combined 93 and 145 GHz bands, overlapping with the majority of the Large Synoptic Survey Telescope sky region and partially with the Dark Energy Spectroscopic Instrument. With up to an order of magnitude lower polarization noise than maps from the Planck satellite, the high-resolution sky maps will constrain cosmological parameters derived from the damping tail, gravitational lensing of the microwave background, the primordial bispectrum, and the thermal and kinematic Sunyaev-Zel'dovich effects, and will aid in delensing the large-angle polarization signal to measure the tensor-to-scalar ratio. The survey will also provide a legacy catalog of 16,000 galaxy clusters and more than 20,000 extragalactic sources

Mexico-UK Sub-millimeter Camera for AsTronomy

MUSCAT is a large format mm-wave camera scheduled for installation on the Large Millimeter Telescope Alfonso Serrano (LMT) in 2018. The MUSCAT focal plane is based on an array of horn coupled lumped-element kinetic inductance detectors optimised for coupling to the 1.1mm atmospheric window. The detectors are fed with fully baffled reflective optics to minimize stray-light contamination. This combination will enable background-limited performance at 1.1 mm across the full 4 arcminute field-of-view of the LMT. The easily accessible focal plane will be cooled to 100 mK with a new closed cycle miniature dilution refrigerator that permits fully continuous operation. The MUSCAT instrument will demonstrate the science capabilities of the LMT through two relatively short science programmes to provide high resolution follow-up surveys of Galactic and extra-galactic sources previously observed with the Herschel space observatory, after the initial observing campaigns. In this paper, we will provide an overview of the overall instrument design as well as an update on progress and scheduled installation on the LMT.Comment: Accepted for publication in the Journal of Low Temperature Detector

THz spectroscopy of the atmosphere for climatology and meteorology applications

We present a new satellite-based instrument concept that will enable global measurements of atmospheric temperature and humidity profiles with unprecedented resolution and accuracy, compared to currently planned missions. It will also provide global measurements of essential climate variables related to ice clouds that will better constrain global climate models. The instrument is enabled by the use of superconducting detectors coupled to superconducting filterbank spectrometers, operating between 50GHz and 850 GHz. We present the science drivers, the current instrument concept and status, and predicted performance

A cryogenic testbed for the characterisation of large detector arrays for astronomical and Earth-observing applications in the near to very-long-wavelength infrared

In this paper we describe a cryogenic testbed designed to offer complete characterisation-via a minimal number of experimental configurations— of mercury cadmium telluride (MCT) detector arrays for low-photon background applications, including exoplanet science and solar system exploration. Specifically, the testbed offers a platform to measure the dark current of detector arrays at various temperatures, whilst also characterising their optical response in numerous spectral bands. The average modulation transfer function (MTF) can be found in both dimensions of the array along with the overall quantum efficiency. Working from a liquid-helium bath allows for measurement of arrays from 4.2 K and active-temperature control of the surface to which the array is mounted allows for characterisation of arrays at temperatures up to 80 K, with the temperature of the array holder known to an accuracy of at least 1 mK, with the same level of long-term stability

Thin flexible multi-octave metamaterial absorber for millimeter wavelengths

The development of radiation-absorbent materials and devices for millimeter and submillimeter astronomy instruments is a research area of significant interest that has substantial engineering challenges. Alongside a low-profile structure and ultra-wideband performance in a wide range of angles of incidence, advanced absorbers in cosmic microwave background (CMB) instruments are aimed at reducing optical systematics, notably instrument polarization, far beyond previously achievable specifications. This paper presents a metamaterial-inspired flat conformable absorber design operating in a wide frequency range of 80–400 GHz. The structure comprises a combination of subwavelength metal-mesh capacitive and inductive grids and dielectric layers, using the magnetic mirror concept for a large bandwidth. The overall stack thickness is a quarter of the longest operating wavelength and is close to the theoretical limit stipulated by Rozanov’s criterion. The test device is designed to operate at a 22.5° incidence. The iterative numerical-experimental design procedure of the new metamaterial absorber is discussed in detail, as well as the practical challenges of its manufacture. A well-established mesh-filter fabrication process has been successfully employed for prototype fabrication, which ensures cryogenic operation of the hot-pressed quasi-optical devices. The final prototype, extensively tested in quasi-optical testbeds using a Fourier transform spectrometer and a vector network analyzer, demonstrated performance closely matching the finite-element analysis simulations; that is, greater than 99% absorbance for both polarizations, with only a 0.2% difference, across the frequency band of 80-400 GHz. The angular stability for up to ±10∘ has been confirmed by simulations. To the best of our knowledge, this is the first successful implementation of a low-profile, ultra-wideband metamaterial absorber for this frequency range and operating conditions

The Simons Observatory: Science goals and forecasts

The Simons Observatory (SO) is a new cosmic microwave background experiment being built on Cerro Toco in Chile, due to begin observations in the early 2020s. We describe the scientific goals of the experiment, motivate the design, and forecast its performance. SO will measure the temperature and polarization anisotropy of the cosmic microwave background in six frequency bands centered at: 27, 39, 93, 145, 225 and 280 GHz. The initial configuration of SO will have three small-aperture 0.5-m telescopes and one large-aperture 6-m telescope, with a total of 60,000 cryogenic bolometers. Our key science goals are to characterize the primordial perturbations, measure the number of relativistic species and the mass of neutrinos, test for deviations from a cosmological constant, improve our understanding of galaxy evolution, and constrain the duration of reionization. The small aperture telescopes will target the largest angular scales observable from Chile, mapping ≈ 10% of the sky to a white noise level of 2 μK-arcmin in combined 93 and 145 GHz bands, to measure the primordial tensor-to-scalar ratio, r, at a target level of σ(r)=0.003. The large aperture telescope will map ≈ 40% of the sky at arcminute angular resolution to an expected white noise level of 6 μK-arcmin in combined 93 and 145 GHz bands, overlapping with the majority of the Large Synoptic Survey Telescope sky region and partially with the Dark Energy Spectroscopic Instrument. With up to an order of magnitude lower polarization noise than maps from the Planck satellite, the high-resolution sky maps will constrain cosmological parameters derived from the damping tail, gravitational lensing of the microwave background, the primordial bispectrum, and the thermal and kinematic Sunyaev-Zel'dovich effects, and will aid in delensing the large-angle polarization signal to measure the tensor-to-scalar ratio. The survey will also provide a legacy catalog of 16,000 galaxy clusters and more than 20,000 extragalactic sources

A Bright Submillimeter Source in the Bullet Cluster (1E0657--56) Field Detected with BLAST

We present the 250, 350, and 500 micron detection of bright submillimeter emission in the direction of the Bullet Cluster measured by the Balloon-borne Large Aperture Submillimeter Telescope (BLAST). The 500 micron centroid is coincident with an AzTEC 1.1 mm point-source detection at a position close to the peak lensing magnification produced by the cluster. However, the 250 micron and 350 micron centroids are elongated and shifted toward the south with a differential shift between bands that cannot be explained by pointing uncertainties. We therefore conclude that the BLAST detection is likely contaminated by emission from foreground galaxies associated with the Bullet Cluster. The submillimeter redshift estimate based on 250-1100 micron photometry at the position of the AzTEC source is z_phot = 2.9 (+0.6 -0.3), consistent with the infrared color redshift estimation of the most likely IRAC counterpart. These flux densities indicate an apparent far-infrared luminosity of L_FIR = 2E13 Lsun. When the amplification due to the gravitational lensing of the cluster is removed, the intrinsic far-infrared luminosity of the source is found to be L_FIR <= 10^12 Lsun, consistent with typical luminous infrared galaxies.Comment: Accepted for publication in the Astrophysical Journal. Maps are available at http://blastexperiment.info

Over half of the far-infrared background light comes from galaxies at z >= 1.2

Submillimetre surveys during the past decade have discovered a population of luminous, high-redshift, dusty starburst galaxies. In the redshift range 1 <= z <= 4, these massive submillimetre galaxies go through a phase characterized by optically obscured star formation at rates several hundred times that in the local Universe. Half of the starlight from this highly energetic process is absorbed and thermally re-radiated by clouds of dust at temperatures near 30 K with spectral energy distributions peaking at 100 microns in the rest frame. At 1 <= z <= 4, the peak is redshifted to wavelengths between 200 and 500 microns. The cumulative effect of these galaxies is to yield extragalactic optical and far-infrared backgrounds with approximately equal energy densities. Since the initial detection of the far-infrared background (FIRB), higher-resolution experiments have sought to decompose this integrated radiation into the contributions from individual galaxies. Here we report the results of an extragalactic survey at 250, 350 and 500 microns. Combining our results at 500 microns with those at 24 microns, we determine that all of the FIRB comes from individual galaxies, with galaxies at z >= 1.2 accounting for 70 per cent of it. As expected, at the longest wavelengths the signal is dominated by ultraluminous galaxies at z > 1.Comment: Accepted to Nature. Maps available at http://blastexperiment.info